Mechanical Engineering (BS)
College of Engineering
Program Description
The Mechanical Engineering major is accredited by the Engineering Accreditation Commission of ABET. This major is designed to provide a broad background in the fundamentals of the discipline as well as to offer an introduction to the many professional and technical areas in which mechanical engineers work. The program covers both major streams of mechanical engineering.
-
Mechanical systems, design, and materials processing is concerned with the design, analysis, testing, and manufacture of machinery, vehicles, devices, and systems. Other topics covered are engineering materials, computer-aided design, vibrations, dynamics and control systems. Particular areas of concentration are robotics, vehicle engineering, space systems and biomechanic.
-
Engineering of fluids, energy, and thermal systems is concerned with the efficient conversion of energy, aerospace and surface transportation, the environmental impact of engineering activity (including pollutants and noise), aeronautics, and the experimental and theoretical aspects of fluid flow, heat transfer, thermodynamics, and combustion. Specific areas of concentration include aerospace engineering, energy and the environment, and thermo-fluids engineering.
Program Information
- Instruction Mode: In Person
- Location: Ithaca, NY
- Minimum Credits for Degree: 127
Program Requirements
During the fall semester, sophomores who plan to affiliate with the mechanical engineering major take ENGRD 2020 (also MAE 2020) as an engineering distribution course. ENGRD 2210 (also MAE 2210) is required for the major (but not required to affiliate). The Sibley School supports students who have unusual requirements, but delays or substitutions must be discussed with and receive approval from their major advisor.
The major requires 10 courses (beyond ENGRD 2020 already mentioned) plus six major program electives, which include three major-approved electives, one senior design elective, one math elective, and one technical elective.
Students must complete the courses required for the Common Curriculum plus the major requirements outlined below for a minimum of 128 total credit hours.
| Code | Title | Hours |
|---|---|---|
| Required Major Courses | ||
| ENGRD 2210 | Thermodynamics (crosslisted) | 3 |
| MAE 2250 | Introduction to Mechanical Design | 4 |
| MAE 2030 | Dynamics | 4 |
| Select one of the following: | 4 | |
| Mechatronics | ||
| Introduction to Circuits for Electrical and Computer Engineers (crosslisted) | ||
| Electronic Circuits (crosslisted) | ||
| MAE 3230 | Introductory Fluid Mechanics | 4 |
| MAE 3240 | Heat Transfer | 3 |
| MAE 3270 | Mechanics of Engineering Materials | 4 |
| MAE 3260 | System Dynamics | 4 |
| MAE 4272 | Fluids and Heat Transfer Laboratory | 3 |
| MAE 4300 | Engineers and Society | 2 |
Design Requirement
Each Mechanical Engineering student must complete a senior design elective. One way of satisfying this requirement is to take a 3+ credit section of MAE 4291 Supervised Senior Design Experience, directed by a faculty member as an individual or team exercise. The other option is to take a 4-credit senior design elective course:
| Code | Title | Hours |
|---|---|---|
| Senior Design Elective | 3-5 | |
| MAE 4021 | Wind Power | 4 |
| MAE 4121 | ||
| MAE 4131 | Mechanics of Composite Structures | 5 |
| MAE 4161 | Spacecraft Technology and Systems Architecture | 4 |
| MAE 4221 | Introduction to Internet of Things - Technology and Engagement | 4 |
| MAE 4231 | Intermediate Fluid Dynamics | 4 |
| MAE 4341 | Innovative Product Design via Digital Manufacturing | 4 |
| MAE 4351 | Interdisciplinary Design Concepts | 4 |
| MAE 4441 | Spacecraft Thermal Management | 4 |
| MAE 4631 | Advanced Product Design | 4 |
| MAE 4641 | Orthopaedic Tissue Mechanics | 4 |
| MAE 4671 | Polymer Mechanics | 4 |
| MAE 4721 | Advanced Applications of Finite Element Analysis Using Ansys | 3 |
| MAE 4861 | Automotive Engineering | 4 |
Electives
Students should use the flexibility provided by the major electives, advisor-approved electives, and liberal studies distribution electives to develop a program to meet their specific goals.
M.E. Major Program Electives
M.E. students must complete any three upper-level major-approved electives totaling at least 9 credits. The major-approved electives are listed below. Students may choose to focus on one subject area, or may select major-approved electives from several different areas.
| Code | Title | Hours |
|---|---|---|
| Aerospace Engineering | ||
| MAE 3050 | Introduction to Aeronautics | 4 |
| MAE 4060 | Introduction to Spaceflight Mechanics | 3 |
| MAE 4070 | Dynamics of Flight Vehicles | 3 |
| MAE 4150 | GPS: Theory and Design (crosslisted) | 4 |
| MAE 4160 | Spacecraft Technology and Systems Architecture | 3 |
| MAE 4230 | Intermediate Fluid Dynamics | 3 |
| MAE 4440 | Spacecraft Thermal Management | 3 |
| MAE 4540 | Propulsion of Spacecraft | 3 |
| Code | Title | Hours |
|---|---|---|
| Biomechanics | ||
| MAE 4640 | Orthopaedic Tissue Mechanics (crosslisted) | 3 |
| MAE 4650 | Biofluid Mechanics (crosslisted) | 3 |
| MAE 4660 | Biomedical Engineering Analysis of Metabolic and Structural Systems (crosslisted) | 3 |
| MAE 5680 | Soft Tissue Biomechanics (crosslisted) | 3 |
| Code | Title | Hours |
|---|---|---|
| Energy and the Environment | ||
| MAE 4020 | Wind Power | 3 |
| MAE 4120 | (crosslisted) | 3 |
| MAE 4230 | Intermediate Fluid Dynamics | 3 |
| MAE 4580 | Introduction to Nuclear Science and Engineering (crosslisted) | 3 |
| MAE 4590 | Introduction to Controlled Fusion: Principles and Technology (crosslisted) | 3 |
| MAE 5010 | Future Energy Systems | 3 |
| MAE 5430 | Combustion Processes | 3 |
| Code | Title | Hours |
|---|---|---|
| Engineering Materials | ||
| MAE 3120 | Mechanical Properties of Materials, Processing, and Design (crosslisted) | 3 |
| MAE 3130 | Atomic and Molecular Structure of Matter (crosslisted) | 3 |
| MAE 4130 | Mechanics of Composite Structures | 4 |
| MAE 4240 | Materials Processing and Manufacturing (crosslisted) | 3 |
| MAE 4450 | Additive Manufacturing: Process Physics, Materials, Properties and Post Processing | 3 |
| MAE 4640 | Orthopaedic Tissue Mechanics (crosslisted) | 3 |
| MAE 4670 | Polymer Mechanics | 3 |
| MAE 4700 | Finite Element Analysis for Mechanical and Aerospace Design | 4 |
| MAE 4721 | Advanced Applications of Finite Element Analysis Using Ansys | 3 |
| MAE 5720 | Advanced Applications of Finite Element Analysis Using Ansys | 2-3 |
| Code | Title | Hours |
|---|---|---|
| Mechanical Systems and Design | ||
| MAE 3780 | Mechatronics 1 | 4 |
| MAE 4150 | GPS: Theory and Design (crosslisted) | 4 |
| MAE 4180 | Autonomous Mobile Robots (crosslisted) | 3 |
| MAE 4190 | Fast Robots (crosslisted) | 4 |
| MAE 4220 | Introduction to Internet of Things - Technology and Engagement | 3 |
| MAE 4320 | Integrated Micro Sensors and Actuators: Bridging the Physical and Digital Worlds (crosslisted) | 4 |
| MAE 4341 | Innovative Product Design via Digital Manufacturing | 4 |
| MAE 4351 | Interdisciplinary Design Concepts | 4 |
| MAE 4630 | Advanced Product Design | 3 |
| MAE 4700 | Finite Element Analysis for Mechanical and Aerospace Design | 4 |
| MAE 4730 | Intermediate Dynamics | 3 |
| MAE 4760 | Foundations of Robotics (crosslisted) | 4 |
| MAE 4770 | Engineering Vibrations | 3 |
| MAE 4780 | Feedback Control Systems | 4 |
| MAE 4810 | Robot Perception (crosslisted) | 3 |
| MAE 5120 | (crosslisted) | 3 |
| MAE 5350 | Multidisciplinary Design Optimization | 4 |
| MAE 5910 | Model Based Systems Engineering (crosslisted) | 4 |
- 1
Students who took MAE 3780 Mechatronics as a required course (see above) may not use it again as a major-approved elective
| Code | Title | Hours |
|---|---|---|
| Thermo-fluids Engineering | ||
| MAE 4230 | Intermediate Fluid Dynamics | 3 |
| MAE 4360 | Design and Simulation of Multiphase Flow Systems | 3 |
| MAE 4510 | Propulsion of Aircraft and Rockets | 3 |
| MAE 4530 | Computer-Aided Engineering: Applications to Biological Processes (crosslisted) | 3 |
| MAE 4540 | Propulsion of Spacecraft | 3 |
| MAE 5010 | Future Energy Systems | 3 |
| MAE 5310 | Advanced Thermodynamics of Multiphase Systems | 4 |
| MAE 5430 | Combustion Processes | 3 |
| Code | Title | Hours |
|---|---|---|
| Vehicle Engineering | ||
| MAE 3050 | Introduction to Aeronautics | 4 |
| MAE 3870 | Fundamentals of Electric-Drive Vehicle Engineering | 3 |
| MAE 4860 | Automotive Engineering | 3 |
| MAE 5070 | Dynamics of Flight Vehicles | 3 |
Note:
** MAE 5210 Dimensional Tolerancing in Mechanical Design is a 1 credit course; if it is used as a major approved elective, an additional major approved elective course or courses must be selected, so that the total number of credits toward major approved elective requirements is 9 or greater.
Math Elective
Each student must complete an approved upper-level math course taken after MATH 2940 Linear Algebra for Engineers. Currently, the approved courses are:
| Code | Title | Hours |
|---|---|---|
| Upper-Level Math Elective | ||
| ENGRD 2700 | Eng Probability and Statistics: Modeling and Data Science 1 | 4 |
| CEE 3040 | Uncertainty Analysis in Engineering 1 | 4 |
| ENGRD 3200 | Engineering Computation | 4 |
| BTRY 3010 | Statistics I 1 | 4 |
| CS 2800 | Mathematical Foundations of Computing 1 | 4 |
- 1
Courses also satisfy the probability and statistics requirement.
Probability and Statistics Requirement
Significant probability and statistics coursework is required for graduation from the Mechanical Engineering Program. Students must take 1 course that fulfills the probability and statistics requirement. That course can also be used as a math elective (MathE), or a technical elective (TechE), or an advisor approved elective (AAE), as indicated below.
Courses currently approved to satisfy the probability and statistics requirement:
| Code | Title | Hours |
|---|---|---|
| Required Probability and Statistics Course | ||
| ENGRD 2700 | Eng Probability and Statistics: Modeling and Data Science (MathE or TechE or AAE) | 4 |
| CEE 3040 | Uncertainty Analysis in Engineering (MathE or TechE or AAE) | 4 |
| ECE 3100 | Introduction to Probability and Inference for Random Signals and Systems (MathE or TechE or AAE) | 4 |
| BTRY 3010 | Statistics I | 4 |
| ECON 3110 | Applied Probability and Statistics (crosslisted) 1 | 4 |
| CS 2800 | Mathematical Foundations of Computing (MathE or TechE or AAE) | 4 |
- 1
MAE will also accept a satisfactory score (4 or 5) on the CEEB Advanced Placement Exam in Statistics as fulfilling the Probability & Stats requirement, but this does not also fill the math elective
Technical Elective
The technical elective may be any course at an appropriate level, chosen from engineering, math, or science (physics, chemistry, or biological sciences). Appropriate level, typically 2000+, is interpreted as being at a level beyond the required courses of the college curriculum. Courses in biology and society (BSOC), economics, business, and organizational behavior are not accepted; advisors may approve such courses as advisor-approved electives. Advanced placement in biology cannot be used for the technical elective, but advisors may approve as an advisor-approved elective.
MAE 4980 and MAE 4610 may not be used as an M.E. major program elective.
| Code | Title | Hours |
|---|---|---|
| Technical Elective | ||
| Any course at an appropriate level, chosen from engineering, math, or science (physics, chemistry, or biological sciences) | ||
Advisor-Approved Electives
To maximize flexibility (i.e., the option for study abroad, Co-op, internships, pre-med, and flexibility during the upper-class years), the Sibley School faculty recommends that students delay use of advisor-approved (AA) electives until after the third semester. Students must seek advisor approval before taking an AA elective. Advanced placement credit may not count as an AA elective. Up to 6 credits of Reserve Officer Training Corps (ROTC) courses numbered 3000 or above or co-listed in an academic department are allowed as AA electives.
Because these courses should help develop and broaden the skills of the engineer, advisors will generally accept the following as approved electives: One introduction to engineering course, engineering distribution courses, courses stressing oral or written communication, upper-level engineering courses, advanced courses in mathematics, and rigorous courses in the biological and physical sciences. Advisors are likely to approve courses in business, economics, and language that serve the student's educational and academic objectives. In other cases, a student's interests might be better served by approved electives that expand the major, or other parts of the curriculum, including the liberal studies requirements.
Some courses are automatically approved as an advisor-approved (AA) elective. These courses include:
- ENGRG 3400 Engineering Student Project Teams
- MAE 4900 Individual and Group Projects in Mechanical Engineering
- Any 2000+ course used towards a minor.
- Any 2000+ liberal studies course (the same course cannot be used as fulfilling a liberal studies requirement as well).
Students can receive pre-approval or verify if their courses can be automatically approved by contacting the MAE Undergraduate Office at mae_undergrad@cornell.edu.
| Code | Title | Hours |
|---|---|---|
| Advisor-Approved Electives | ||
| Advisor Advisor Approved Elective | ||
Other Considerations
It is recommended that the liberal studies distribution electives include studies in history of technology, societal impacts of technology, history, foreign languages, ethics, communications, political science, aesthetics, economics, and/or architecture.
The Sibley School facilitates its students to spend a semester or year abroad at foreign universities with which the college has an exchange agreement, such as the Ecole Centrale de Paris.
The Engineering Communication requirement of the common curriculum is satisfied by MAE 4272 Fluids and Heat Transfer Laboratory.
A limited set of second- and third-year courses is offered each summer under the auspices of the School of Continuing Education and Summer Sessions and the Engineering Cooperative Education Program.
Preparation in Aerospace Engineering
There is no separate undergraduate major in aerospace engineering, but students may prepare for a career or graduate program in this area by majoring in mechanical engineering and taking courses from the aerospace engineering minor, for example, spacecraft technology, introduction to aeronautics, and aerospace propulsion systems. It is also possible to prepare for a career or graduate program in aerospace engineering through appropriate course selection in other majors, for example: electrical and computer engineering, engineering physics, or the physical sciences. Subjects recommended as preparation for aerospace engineering endeavors include thermodynamics, fluid mechanics, structures, vibrations, feedback controls, applied mathematics, chemistry, and physics.
University Graduation Requirements
Requirements for All Students
In order to receive a Cornell degree, a student must satisfy academic and non-academic requirements.
Academic Requirements
A student’s college determines degree requirements such as residency, number of credits, distribution of credits, and grade averages. It is the student’s responsibility to be aware of the specific major, degree, distribution, college, and graduation requirements for completing their chosen program of study. See the individual requirements listed by each college or school or contact the college registrar’s office for more information.
Non-academic Requirements
Conduct Matters. Students must satisfy any outstanding sanctions, penalties or remedies imposed or agreed to under the Student Code of Conduct (Code) or Policy 6.4. Where a formal complaint under the Code or Policy 6.4 is pending, the University will withhold awarding a degree otherwise earned until the adjudication process set forth in those procedures is complete, including the satisfaction of any sanctions, penalties or remedies imposed.
Financial Obligations. Outstanding financial obligations will not impact the awarding of a degree otherwise earned or a student’s ability to access their official transcript. However, the University may withhold issuing a diploma until any outstanding financial obligations owing to the University are satisfied.
Additional Requirements for Undergraduate Students
The University has two requirements for graduation that must be fulfilled by all undergraduate students: the swim requirement, and completion of two physical education courses. For additional information about fulfilling University Graduation Requirements, see the Physical Education website.
Physical Education
All incoming undergraduate students are required to take two credits (two courses) of Physical Education prior to graduation. It is recommended they complete the two courses during their first year at Cornell. Credit in Physical Education may be earned by participating in courses offered by the Department of Athletics and Physical Education and Cornell Outdoor Education, by being a registered participant on a varsity athletic team, or performing in the marching band.
Students with medical concerns should contact the Office of Student Disability Services.
Swim Requirement
The Faculty Advisory Committee on Athletics and Physical Education has established a basic swimming and water safety competency requirement for all undergraduate students. Normally, the requirement is taken during the Fall Orientation process at Helen Newman Hall or Teagle Hall pools. The requirement consists of the following: jump or step feet-first into the deep end of the pool, float or tread for one minute, turn around in a full circle, swim 25 yards using any stroke(s) of choice without touching the bottom or holding on to the sides (there is no time limit) and exit from the water. Students who do not complete the swim requirement during their first year, during a PE swim class or during orientation subsequent years, will have to pay a $100 fee. Any student who cannot meet this requirement must register for PE 1100 Beginning Swimming as their physical education course before electives can be chosen.
If a student does not pass the swim requirement in their first Beginning Swimming PE class, then the student must take a second Beginning Swimming PE class (PE 1100 or PE 1101). Successful completion of two Beginning Swimming classes (based on attendance requirements) with the instructor's recommendation will fulfill the University's swim requirement.
Students unable to meet the swim requirement because of medical reasons should contact the Office of Student Disability Services. When a waiver is granted by the Faculty Committee on Physical Education, an alternate requirement is imposed. The alternate requirement substitute is set by the Director of Physical Education.
College of Engineering Graduation Requirements
Undergraduate Study
Students in the College of Engineering spend most of their first two years of undergraduate studies in the Common Curriculum, which is administered by the College Curriculum Governing Board (CCGB) through the associate dean for undergraduate programs and Engineering Advising. By the end of their third semester, they typically apply to affiliate with an Engineering major and must be affiliated by the start of their fifth semester.
Criteria for affiliation with the majors are described in this section under "Affiliation with a Major". The Undergraduate Engineering Majors are listed on the College of Engineering Programs page.
Many of the majors have a corresponding minor, in which the student can pursue a secondary interest if eligible. In addition, there are minors that cut across majors including applied mathematics, engineering management, engineering statistics, game design, artificial intelligence, information science, and business. See Engineering Minors section of the College of Engineering Programs page for a listing of Undergraduate Minors.
Engineering Core Requirements - Engineering Major
Engineering Majors
To receive the bachelor of science degree, students must meet the requirements of the Common Curriculum (outlined below) as set forth by the College of Engineering, including the requirements of their chosen major, as established by the school or department that administers the major. (Further explanation of the revised Common Curriculum and major flow charts are provided in the Engineering Undergraduate Handbook.)
| Course Category | Credits |
|---|---|
| Mathematics (major-specific) | 14-16 |
| Physics (major-specific) | 8-13 |
| Chemistry (major-specific) | 4-8 |
| First-year writing seminars | ≥6 |
| Engineering Communication1 | 1-3 |
| Computing | 4 |
| Engineering Distribution | |
a. One introduction to engineering (ENGRI) | 3-4 |
b. Two engineering distributions (ENGRD) | 6-8 |
| Liberal studies distribution (6 courses min.) | ≥18 |
| Advisor Approved electives | ≥6 |
| Major program | |
a. Major-required courses | ≥30 |
b. Major-approved electives | ≥9 |
c. Courses outside the major | ≥9 |
| Two semesters of physical education and demonstration of proficiency in swimming (university requirement) |
- 1
Engineering-communication courses may simultaneously fulfill another requirement.
Total credits required for graduation vary by major (see Engineering Majors).
Mathematics
The normal program in mathematics includes MATH 1910, MATH 1920, MATH 2930 or MATH 2940 depending on the major), and a major-specific math course for some majors. At least C– must be attained in these courses; if not, the course must be repeated immediately before the next course in the sequence is taken. Failure to achieve at least C– the second time will result in, at minimum, an automatic required leave of absence for one semester from the College of Engineering. Courses that are taken a second time do not yield additional credit toward a degree.
Physics
The normal program in physics includes PHYS 1112, PHYS 1110, PHYS 2213, and PHYS 2214 or the corresponding honors courses (PHYS 1116, PHYS 1110, PHYS 2210, PHYS 2217, and PHYS 2218). Engineering students should attain at least C– in each math prerequisite of a physics course before taking the physics course (e.g., C– in MATH 1910 before taking PHYS 1112 and C– in MATH 1920 before taking PHYS 2213). Substitutions for PHYS 2214 are possible in certain majors. Please consult the Engineering Undergraduate Handbook for details.
Chemistry
CHEM 2090 and CHEM 2091 is required. While the content of CHEM 2090 and CHEM 2091is the same as that of CHEM 2070 and span class="structuredcontent" college="all" contenteditable="false" department="CHEM" id="courseinline24" title="Inline Course - Double Click to Edit">CHEM 2071, Engineering students are expected to take CHEM 2090 and CHEM 2091.
Typically, CHEM 2090 and CHEM 2091 is taken during the first year, but students who wish to first complete the physics sequence (PHYS 1112, PHYS 1110, PHYS 2213, and PHYS 2214, depending on the major) may postpone CHEM 2090 and CHEM 2091 until the sophomore year.
Students considering chemical engineering or a health-related career such as medicine must take CHEM 2090 and CHEM 2091 in the fall of their first year and CHEM 2080 and CHEM 2081 in the spring semester.
Computing
Students must complete one Introduction to Computing course during either semester of the first year. Students can take either CS 1110 or CS 1112. Some majors may have a preference of either CS 1110 or CS 1112, however, either one will count toward the degree requirement.
First-Year Writing Seminars
Each semester of their first year, students choose a first-year writing seminar from courses offered by over 30 different departments across the university. These courses offer the student practice in writing English prose and college level discourse within a small class (<20) setting.
Engineering Communications
Students can fulfill the Engineering Communications Requirement using one of the options below. See the Engineering Communications Program website for more information.
Category A: Via the Engineering Communications Program Courses and Opportunities
- Engineering Communication Program Courses
Courses in this category, offered by the Engineering Communications Program (ECP), develop communication skills in a variety of genres, including writing, presenting, multimodal forms, graphics, charts, posters, and other. These courses fulfill the Engineering Communication Requirement for Cornell's College of Engineering.Course List Code Title Hours ENGRC 3025 Creating and Communicating Your Digital Professionalism 1 ENGRC 3026 Engineering Presentations and Expert Presence 1 ENGRC 3027 Cross-cultural Communications and Ethics in the Workplace 1 ENGRC 3340 Independent Study in Engineering Communications 1-3 ENGRC 3350 Organizational Communications for Engineers 3 ENGRC 3500 Engineering Communications 3 ENGRC 3700 Communications Consulting for Engineers 3 - Complete a Communication-Intensive Co-op, listed as ENGRC 3024
This is an opportunity to combine work and academics. Some co-op students do a significant amount of writing and other communicative work on the job; under certain circumstances, a set of authentic work artifacts combined with on-site manager reviews and guide, reflective summary assignments with an ECP instructor will satisfy the Engineering Communications Requirement. This option does not count toward the Liberal Studies requirements for engineers. Students should begin organizing this request the semester prior to being on-site for the co-op or internship. Not offered AY 2025-2026. - Enroll in and pass ENGRC 3023
A one credit attachment to an engineering course that is not one of the officially designated W-I or C-I courses. CE instructors may occasionally wish to extend communication competencies with added work inside their course for a given semester so that it will fulfill the Engineering Communications Requirement. With approval from the College Curriculum Governing Board (CCGB) Subcommittee on Engineering Communications, instructors may have students co-register in ENGRC 3023, which may be taken more than once with different courses by permission of the engineering instructors. This option does not count toward the Liberal Studies requirement for engineers, even via petition. More information can be found at the Cornell Engineering website.
To begin,& send an email to engrcomm_info@cornell.edu, requesting the full ENGRC 3023 information packet. Please insert "3023 request" in the subject line.
Paperwork is due by the last Wednesday in January for the Spring semester. - Complete and Pass a One Credit Partner Course
The current options are below, and they require enrollment in the departmental course (usually three credits) and its corresponding ENRGRC course (one credit). The below courses do not count toward the Liberal Studies requirement for engineers, even via petition:Course List Code Title Hours ENGRC 3120 Communications for Practical Tools for Operations Research, Machine Learning and Data Science 1 1 ENGRC 3152 Communication for Game Development 2 1 ENGRC 3610 Communication for Transportation Engineering 3 1 ENGRC 4152 Communication for Advanced Game Development 4 1 ENGRC 4590 Communications for Physical Design in Biological Engineering 5 1 - 1
1cr partnered with ORIE 3120 Practical Tools for Operations Research, Machine Learning and Data Science
- 2
1cr partnered with CS 3152 Introduction to Computer Game Architecture/INFO 3152 Introduction to Computer Game Design
- 3
1cr partnered with CEE 3610 Introduction to Transportation Engineering
- 4
1cr partnered with CS 4152 Advanced Topics in Computer Game Architecture/INFO 4152 Advanced Topics in Computer Game Design
- 5
1cr partnered with BEE 4590 Physical Design in Biological Engineering
- Apply for ENGRC 3341 Guided Fieldwork for Engineering Communications
Occasionally, a student will be doing a significant amount and variety of engineering or technical communication elsewhere in the College of Engineering, usually as part of a research team, as part of leadership in a project team, and the like. It may be appropriate to petition the CCGB's Subcommittee on Engineering Communications for permission to use as ENGRC 3341 as an option for upcoming projects (not past ones) to meet the Engineering Communications Requirement. This option does not count toward the Liberal Studies requirement for engineers, even via petition. It is essential for students and their mentoring Engineering faculty to prepare well in advance for this option.Request the information packet and form by emailing engrcomm_info@cornell.edu with "3341 request" in the subject line. This option is not to be used for work done by teaching assistants, nor is it to be used to finish up work from prior semesters in another course. More information can be found at the Cornell Engineering website.
Paperwork is due by the last Wednesday in August for the Fall semester and the last Wednesday in January for the Spring semester.
Category B: Via Other Paths
- Take an officially designated Writing-Intensive (W-I) or Communication-Intensive (C-I) engineering course.
- Note: The following course list is not comprehensive, as different engineering departments may offer W-I or C-I courses on an ad-hoc basis. Indeed, these offerings can change each semester. Students need to check with their major advisors each semester to confirm if a course will fulfill the Engineering Communications Requirement; curriculum approvals are made by each major via CCGB approval. W-I or C-I courses are based in a major, as part of that major's regular core offerings to its declared/affiliated undergraduate majors. This option does not count toward the Liberal Studies requirement for engineers, even via petition. See also the CE Undergraduate Handbook.
- It's important to note that these options usually only fulfill the Engineering Communications Requirement for their own majors. Students, advisors, and departments need to cross check against each student's major requirements for graduation. The Engineering Communications Program does not control, monitor, or assess for these courses. This option does not count toward the Liberal Studies requirement for engineers, even via petition.
| Code | Title | Hours |
|---|---|---|
| BEE 4530 | Computer-Aided Engineering: Applications to Biological Processes (crosslisted) | 3 |
| BEE 4730 | Watershed Engineering | 4 |
| BEE 4590 | Physical Design in Biological Engineering | 3 |
| BME 4190 | Laboratory Techniques for Molecular, Cellular, and Systems Engineering | 3 |
| BME 4390 | Circuits, Signals and Sensors: Instrumentation Laboratory | 3 |
| BME 4490 | Biomechanics Laboratory (crosslisted) | 3 |
| CHEME 4320 | Chemical Engineering Laboratory | 4 |
| ECE 4920 | ECE Technical Writing | 1 |
| MAE 4272 | Fluids and Heat Transfer Laboratory | 3 |
| MSE 4030 | Senior Materials Laboratory I | 4 |
| ORIE 4100 | Manufacturing Systems Design: A Consulting Boot Camp | 4 |
- Enroll in and pass COMM 3020 or COMM 3030 taught by the Department of Communication (in the College of Agriculture and Life Sciences). The Engineering Communications Program does not control, monitor, or assess for these courses. This option does not count toward the Liberal Studies requirement for engineers, even via petition. See also the CE Undergraduate Handbook.
Introduction-to-Engineering Course:
An introduction-to-engineering course (designated ENGRI) is expected to be completed by the end of a student’s first year. This course introduces students to the engineering process and provides a substantive experience in an open-ended problem-solving context. See the Introduction-to-Engineering course listing for current course offerings.
- Enroll in and pass HADM 3670, taught through the Nolan School
- The Engineering Communications Program does not control, monitor, or assess for these courses. This option does not also fulfill the Liberal Studies requirement, even via petition. See also the Engineering Undergraduate Handbook.
Engineering Distribution
Two engineering distribution (ENGRD) courses (6–8 credits) must be selected from two different categories listed below. A student may use any one of the possible substitutions described.
- Scientific computing:
Course List Code Title Hours ENGRD 2110 Object-Oriented Programming and Data Structures (crosslisted) 4 ENGRD 2112 Object-Oriented Design and Data Structures - Honors (crosslisted) 4 ENGRD 2140 Computer Systems Programming (crosslisted) 4 ENGRD 3200 Engineering Computation (crosslisted) 4 - Materials Science:
ENGRD 2610 Mechanical Properties of Materials: From Nanodevices to Superstructures
ENGRD 2620 Electronic Materials for the Information Age - Mechanics:
ENGRD 2020 Statics and Mechanics of Solids
Note: Majors in Engineering Physics may use AEP 3330 as an ENGRD in this category. - Probability and statistics:
ENGRD 2700 Eng Probability and Statistics: Modeling and Data Science
Note: Majors in Engineering Physics may substitute MATH 4710 for ENGRD 2700. Majors in Civil Engineering, Biological Engineering, and Environmental Engineering may substitute CEE 3040 for ENGRD 2700.
ENGRD 2720 - Electrical sciences:
Course List Code Title Hours ENGRD 2100 Introduction to Circuits for Electrical and Computer Engineers (crosslisted) 4 ENGRD 2300 Digital Logic and Computer Organization (crosslisted) 4 ENGRD 2550 Engineering Quantum Information Hardware (crosslisted) 3 - Thermodynamics and energy balances:
ENGRD 2111 Biomolecular Thermodynamics
ENGRD 2190 Chemical Process Design and Analysis
ENGRD 2210 Thermodynamics
- Earth and life sciences:
Course List Code Title Hours ENGRD 2250 The Earth System (crosslisted) 4 ENGRD 2510 Engineering Processes for Environmental Sustainability (crosslisted) 3 ENGRD 2600 Principles of Biological Engineering (crosslisted) 3 - Biology and chemistry:
Course List Code Title Hours ENGRD 2202 Biomedical Transport Phenomena (crosslisted) 3 CHEM 3890 Honors Physical Chemistry I 4 ENGRD 2520 The Physics of Life (crosslisted) 3 BIOMG 3300 Principles of Biochemistry, Individualized Instruction 4 or BIOMG 3310 Principles of Biochemistry: Proteins and Metabolism or BIOMG 3350 Principles of Biochemistry: Proteins, Metabolism, and Molecular Biology
Additional Information
Some majors may require completion of 9 specific engineering distribution courses for affiliation (acceptance into the major), or as a prerequisite for upper-class courses. For complete information, please see Affiliation with a Major and the flow charts for each major in the Engineering Undergraduate Handbook.
Note: Some majors require additional distribution courses after affiliation.
Liberal Studies Distribution
Global and diverse societies require that engineers have an awareness of historical patterns, an appreciation for different cultures, professional ethics, the ability to work in multifaceted groups, and superior communication skills. Cornell has a rich curriculum in the humanities, arts, and social sciences, enabling every engineering student to obtain a truly liberal education. The rationale for these distribution courses is discussed in the Requirements for Graduation section of the Engineering Undergraduate Handbook and these courses should be chosen with as much care and foresight as courses from technical areas.
Requirements:
- At least six courses (totaling at least 18 credits)
- The six courses must be chosen from the categories listed and come from at least three different groups outlined in the following section
- At least 3 or more credits must be chosen from Group 7
- No more than two courses may be chosen from Group 6 (CE)
- At least two courses must be at the 2000 level or higher
The categories outlined above have been organized into seven Groups based on common themes in content. Those Groups are as follows:
Group 1. Cultural Analysis, Literature and the Arts, Social Differences
- Cultural Analysis (CA)
- Literature and the Arts (LA)
- Literature, the Arts and Design (LAD)
- Arts, Literature, and Culture (ALC)
- Social Difference (SCD-HA only. SCD-AS not allowed in this group.)
Group 2. Historical Analysis
- Historical Analysis (HA/ HST)
Group 3. Ethics, Cognition, and Moral Reasoning
- Knowledge, Cognition, and Moral Reasoning (KCM)
- Ethics and the Mind (ETM)
Group 4. Social Science and Global Citizenship
- Social and Behavioral Analysis (SBA)
- Social Sciences (SSC)
- Global Citizenship (GLC)
Group 5. Foreign Languages (not literature courses) (FL)
- Courses teaching language skills, inclusive of reading, writing, listening, and spoken non-English languages, at beginning to advanced levels.
Group 6. Communications in Engineering (CE)
- Engineering specific courses exploring communication as a way of acting in the world
- Courses must be specifically designated by CCGB as satisfying the CE category (no petitions)
- No more than two courses from this category may be used to satisfy the liberal studies requirement
Group 7. Race and Equity
- Social Difference (SCD-AS only. SCD-HA not allowed in this group)
- Diversity (D-AG only. D-HE not allowed in this group)
Students should utilize the current Courses of Study as the master list of approved liberal studies courses. Refer to Cornell Engineering Advising's Liberal Studies Policies webpage for complete lists of additional approved courses and unacceptable courses. Please direct any questions to Engineering Advising, 180 Rhodes Hall.
Electives
- Advisor-Approved electives: 6 credits required (approved by the faculty advisor1). Because these courses should help develop and broaden the skills of the engineer, faculty advisors generally accept the following as approved electives (as long as they are not being used elsewhere toward degree requirements):
- One additional introduction-to-engineering course (ENGRI)
- Engineering distribution courses
- Courses stressing written or oral communication
- Upper-level engineering courses
- Advanced courses in mathematics
- Rigorous courses in the biological and physical sciences
- Courses in business, economics, or language (when they serve the student's educational and academic objectives)
- Courses that expand the major or another part of the curriculum, including liberal studies electives not already being used toward the Liberal Studies Distribution requirement.
- Up to 6 credits of approved electives may come from ROTC courses at the 3000-level or higher.
- Major-approved electives: 9 credits (approved by the major and faculty advisors in the major). Refer to the major curricula for descriptions of courses in this category.
- Outside-the-major electives: 9 credits of courses outside the major to ensure breadth of engineering studies; these courses may be subject to major specific requirements for appropriateness.
- 1
In the event a student and their faculty advisor disagree regarding the suitability of an approved elective, the student may appeal the decision to the Director of Undergraduate Studies (Associate Director) for their major department or to the Associate Dean for Undergraduate Programs.
First-Year Requirements
During the first year, engineering students are expected to complete (or receive credit for) the following core requirements:
| Code | Title | Hours |
|---|---|---|
| MATH 1910 & MATH 1920 | Calculus for Engineers and Multivariable Calculus for Engineers | 4 |
| Select two of the following: | 4-8 | |
| General Chemistry II | ||
| CHEM 2081 | General Chemistry II Laboratory 1 | 1 |
| Engineering General Chemistry | ||
| Physics I: Mechanics and Heat | ||
| Introduction to Experimental Physics | ||
| Physics II: Electromagnetism | ||
| Physics III: Oscillations, Waves, and Quantum Physics (or the Honors equivalent) 2 | ||
| One of: CS 111X | ||
| Two first-year writing seminars | ||
| One introduction to engineering (ENGRI) course | ||
| Two physical education courses and the university swim test | ||
- 1
Depends on the major.
- 2
Depending on the major, students interested in chemical engineering, pre-med, or other health-related careers should enroll in the CHEM 2090 and CHEM 2091- CHEM 2080 and CHEM 2081 sequence during their first year.
Students interested in biomedical engineering should additionally complete BIOMG 1350 during the first year.
Affiliation with a Major
Students are encouraged to apply for affiliation with a major during the first semester of their sophomore year, although earlier affiliation may be granted at the discretion of the major. This is done by completing the Application for Major Affiliation via the Engineering Registrar's website. To affiliate, students must:
- make good progress toward completing required courses in the common curriculum,
- have a GPA ≥ 2.0, and
- have satisfied the major's course and grade requirements as specified below:
Students must be affiliated or conditionally affiliated with a major by the beginning of their fifth semester or they will be withdrawn from the College of Engineering, and therefore Cornell.
Biological Engineering1
Minimum cumulative GPA of 2.5 and at most one grade below C– in any math, chemistry, physics, and engineering courses: CS 1110 , CS 1112, ENGRI, ENGRD, and any engineering course cross-listed with ENGRI or ENGRD. Completion of BEE 2600/ENGRD 2600 or ENGRD 2510 with at least C–,and one year of Introductory Biology (two lectures and a lab) with grades of at least C–. Allowable courses include BIOMG 1350, BIOG 1440, BIOG 1445 BIOG 1500, and BIOEE 1610. No more than two credits of research/project team and two credits of arts performance courses will count toward the cumulative GPA required for affiliation.
Biomedical Engineering
Minimum GPA of 2.4 in designated math, science, and engineering courses completed with grades of C- or higher.
To apply for affiliation in the third semester, a student must be on track to complete the following requirements by the end of the third semester: BIOMG 1350 (or a score of 5 on the CEEB AP Exam (or equivalent)), MATH 1910, MATH 1920, MATH 2930, PHYS 1112, PHYS 1110, PHYS 2213, CHEM 2090 CHEM 2091, ENGRD 2111, CS 111X, and any ENGRI. BIOG 1440 cannot be used to satisfy this requirement for students entering Fall 2017 and after.
To apply for affiliation in the fourth semester, a student must be on track to complete the above courses plus the following additional courses by the end of the fourth semester: MATH 2940, ENGRD 2020, BME 2000, and BME 2010.
Chemical Engineering
At most one grade below C- in chemistry, math, physics, and chemical engineering courses, and a GPA ≥2.2 in math, science, and engineering courses (except independent study, seminar, research, or project teams).
To apply for affiliation in the third semester, a student must be on track to complete the following requirements by the end of the semester:
- Mathematics: MATH 1910 , MATH 1920 , and MATH 2930
- Chemistry: CHEM 2090 & CHEM 2091 , and CHEM 2080 & CHEM 2081 (or a score of 5 on the CEEB Advanced Placement exam for Chemistry and CHEM 2150 or CHEM 2080 & CHEM 2081 )
- Physics: PHYS 1112 , PHYS 1110 , and PHYS 2213
- Computing: CS 111X
- Engineering Distribution: One Introduction to Engineering course (ENGRI 1XXX), ENGRD 2190 , and CHEM 3890
- Two First-Year Writing Seminars
- One Liberal Studies Distribution course
Students applying in the fourth semester must be on track to complete the following prerequisites for junior year as well as the core requirements listed above: MATH 2940 or CEE 3040 or ENGRD 2700 , CHEM 2900 , CHEME 2200 , CHEME 3230 , and additional Liberal Studies Distribution course.
Civil Engineering
GPA ≥ 2.0 in all engineering, math, and science courses that have been completed at the time of affiliation. C grade or higher in ENGRD 2020.
Computer Science
At least C (not C-) in all completed CS courses and all critical math courses. GPA ≥ 2.5 in CS 2110/ CS 2112 and CS 2800/ CS 2802, or ECE 2400/ENGRD 2140 and CS 2800/CS 2802 and CS 3110. CS GPA calculation may be supplemented by the following courses: CS 3110 and CS 3410/ CS 3420. GPA ≥ 2.3 between MATH 1920 and any other completed critical math course(s): MATH 2940, MATH 4710, BTRY 3080/STSCI 3080, CS 4850, ECON 3130, ECE 3100, ENGRD 2700. If only AP/CASE credit appears, then another Cornell critical math course must be taken to affiliate. Qualifying courses must be taken at Cornell for a letter grade. A required supplemental application must be submitted along with the College of Engineering Application for Major Affiliation.
Earth and Atmospheric Sciences
The following courses must be completed or currently enrolled in at the time of affiliation: MATH 1910, MATH 1920, MATH 2930, MATH 2940, PHYS 1112, PHYS 1110, PHYS 2213, CHEM 2090 & CHEM 2091, CHEM 2080 & CHEM 2081 (or CHEM 1570 or PHYS 2214). Must have at least a C- in all courses taken and a cumulative GPA of 2.3 or higher.
Electrical and Computer Engineering
At least C+ in: MATH 2930 or MATH 2940, PHYS 2213, and one of ECE 2100/ENGRD 2100, ECE 2720 or ECE 2300/ENGRD 2300.
Must have a GPA ≥ 2.5 in (if completed): MATH 1920, MATH 2930, MATH 2940, PHYS 2213, ENGRD 2110, ECE 2400/ENGRD 2140, ECE 2300/ENGRD 2300, ECE 2100/ENGRD 2100, ECE 2720/ENGRD 2720.
Engineering Physics
At least B– in all required math and physics courses: MATH 1910, MATH 1920, MATH 2930, MATH 2940, PHYS 1110, PHYS 1112 / PHYS 1116, PHYS 1110, PHYS 2213 / PHYS 2217, PHYS 2214 / PHYS 2218, PHYS 2210.
Environmental Engineering1
f
GPA ≥ 2.0 in all math, science, and engineering courses. At least C– in BEE 2510/ENGRD 2510.
Independent Major
Students must submit, and receive approval for, a proposed program including endorsement from advisors for a primary and secondary area. See the IM website for specific requirements and deadlines.
Information Science Systems, and Technology
At least a C in two of MATH 2940, CS 2110/ENGRD 2110, and ENGRD 2700 (must have taken at least two of these courses at time of affiliation). GPA ≥ 2.5 between CS 2110/ENGRD 2110,ENGRD 2700, and all completed MATH and ISST Major core courses. Qualifying courses must be taken at Cornell, and for a letter grade. A required supplemental application must be submitted to ISST in addition to the College of Engineering’s Application for Major Affiliation.
Students in their senior year of study intending to change majors to ISST or add ISST as a second major must submit a course plan to demonstrate they can complete all degree requirements by their current expected graduation date.
Materials Science and Engineering
On track to complete by the end of the fourth semester the following required courses, and completion of at least 24 credits from these courses, when applying for affiliation: MATH 1910, MATH 1920, MATH 2930, MATH 2940 (all with a minimum grade of C),PHYS 1110, PHYS 1112/PHYS 1116, PHYS 2213/PHYS 2213, CHEM 2090 & CHEM 2091, and CS 1110/CS 1112.
Additionally, cumulative GPA ≥2.0 in the completed required math, physics, and chemistry courses (including MSE 3010 if taken) and at least C in ENGRD 2610 or ENGRD 2620.
For any course that is repeated, the most recent grade will be used for affiliation requirements. However, repeated grades will be included for GPA calculations.
Students who will not satisfy these requirements by the end of the fourth semester should contact the MSE department about alternative paths to affiliation.
Mechanical Engineering
At least C– in ENGRD 2020 and all completed required math, physics, chemistry, and computer science courses. ENGRD 2210 is recommended prior to affiliation. GPA > 2.5 in these courses: ENGRD 2210 (if taken), MATH 2930, PHYS 2213, and ENGRD 2020.
Operations Research and Engineering
At least C in each of ENGRD 2700 and MATH 2940. GPA ≥ 2.2 in math, science, and engineering courses (both overall and in the term immediately before affiliation). At least C– in all ORIE courses completed thus far. Good academic standing in the College of Engineering.
- 1
Students may major in biological engineering and environmental engineering through the College of Engineering or the College of Agriculture and Life Sciences (CALS). Students who do so through the College of Agriculture and Life Sciences are jointly administered by the College of Engineering and the College of Agriculture and Life Sciences.
Honors Program Within Majors
Many of the engineering majors supplement the major with an honors program.
Eligibility
The B.S. degree with honors is granted to engineering students who, in addition to having completed the requirements for a B.S. degree in a major, satisfactorily complete the honors program in the major and are recommended for the degree by the honors committee of that major. To enter an honors program, the student must be on track to graduate with distinction, and a student who does not stay on track to graduate with distinction is will be dropped from the honors program.
At least 9 extra credit hours are required for the honors degree, and a student must be in the program for at least two semesters before graduation. Courses taken to satisfy the honors requirement may not be used to satisfy any other B.S. degree requirements.
No research, independent study, or teaching for which the student is paid may be counted toward the honors program.
Procedures
An applicant to the honors program in a major must have an honors advisor: a faculty member from that major who will supervise the honors program and direct any research or project. The honors advisor need not be the student's advisor in the major.
The application for the honors program should be a letter from the student that describes the proposed honors program in detail and includes the explicit approval of the honors advisor.
Students must complete a written application no later than the beginning of the first semester of their senior year, but they are encouraged to make arrangements with the honors advisor during the second semester of their junior year. Each major may place further constraints on timing.
Major-Specific Information
Each major defines the content of the honors program and may also place other requirements on the program, in terms of timing, content, and procedures. Information is given within the description of the individual majors.